SELF ADHESIVE ANTI SKID TAPE PREVENTS COSTLY SLIPS
-
Quick, simple & easy to apply
-
Exceptional slip prevention
-
No specialist knowledge required
-
Strong, long life adhesive keeping the
product in place -
Usable on nearly all properly prepared surfaces
(Clean, Dry, Smooth) -
Priming of concrete, cement & wood surfaces recommended.
-
Durable, highly wear & tear resistant
-
Forklift traffic resistant
-
UV - Stable
-
Wide useful temperature range -40 up to +80 C
-
Installation temperature from +12C upwards
-
Can be walked on immediately after installation
-
Load bearing after 6 -8 hours
-
Maximum adhesion after 48 hours
(depending on temperature & humidity) -
Available in 1", 2", 4" x 60Ft standard roll size
-
Please contact for customization
SKID CARE PRODUCTS
ANTI SKID SLOGAN TREADS
DIAGONAL STRIPED EDGES WITH BLACK PRINTS
-
Designed for areas that require a constant safety reminder.
-
The durable and visible treads with eye catching color
-
and diagonal strips edges are a must in high traffic location.
-
Size: 150mm X 600mm
GLOW IN DARK ANTI SKID TAPES
-
MARKING OF HAZARDOUS AREAS DAY OR NIGHT.
-
For indoor areas.
-
For medium to high traffic.
-
Long life Photo- luminescent PVC grit carrier substrate Solid Product non - laminated.
-
Size: 1" x 60 Ft Roll & 2" x 60 Ft Roll
CONFORMAL ANTI SKID TAPE FOR IRREGULAR SURFACE
-
Self Adhesive & Anti Abrasive tapes. For slippery, wet and oil or greasy Floors, stair, ramp.
-
Superior slip resistance, long life durability.
-
Quick, easy and clean to apply, no special
-
Knowledge required.
-
Permanent hold due to strong adhesive.
-
Easy & clean.
-
To be used inside & outside.
NON ABRASIVE ANTI-SKID TAPES
- Good skid prevention.
- Bare foot zones.
- Resist soiling, easy to clean with soap & water.
- Residential, sports, bath-tub & swimming pool.
- Highly flexible, suitable, for bending round edges.
-
2" X 60 Ft roll.Size:
-
Colors: Black, Clear, Black/Yellow stripped.
MULTI-FUNCTIONAL ANTI SKID TAPES
-
Marking of hazardous area
by integrated warning striped. -
For indoors and outdoors use.
-
For medium to high traffic.
-
Temperature range of -20C to 60C
-
Reflecting & Luminescent warning strip.
-
Size: 150mm x 610mm
ANTI SKID STRIPPED
- Adhesive back layer and skid resistant surface
offers a convenient low cost method to
reduce slippery floors, stairs, ramps,
shower & bath bottoms. -
Good for use around swimming pools and marine ship to prevent skid.
-
Chemical splash Grit - 60.
-
Size: 50mm x 60mm
GLITTER ANTI-SKID TAPES
- Ideal for high traffic public areas.
Eg: shopping malls, stadiums, sports halls, Multi-storey car parks and train stations.
- Long lasting hazard warning effects.
- For indoor and outdoors areas.
- Temperature range -40C to + 600C
ANTI SKID MAT
Both sides are slip-proof special rubber mat, portable & no accumulation of fluids on mat. Prevention of slipping accidents.
On smooth, wet floors or floors smeared with oil or grease.
For medium to high traffic. In production areas, food processing, drinks filling stations, kitchens & canteens.
In front of machines, tables, packaging stations. Largely chemical resistant. Mineral oil resistant. Exceptional skid prevention.
Anti fatigue, temperature insulating, sound proofing, very high wear resistance, UV stable, easy cleaning.
Size: 50mm x 60mm
-
Prevention of slipping accidents and the resulting costs rectifies smooth, wet substrates or substrates smeared with oil or grease (proper substrate preparation required)
-
For internal & external areas (depending on type) tape
-
For low, medium or high traffic (depending on type) tape
-
Entrances, Passages, Paths
-
Steps, Slopes, Ramps
-
Machines, Vehicles
-
Kitchen & Canteens
-
Terraces, Shelters
Installation
-
Ensure that the surface is clean and dry, free of oils, sand or dust.
-
Release a part of paper liner.
-
Apply adhesive part of tape to the surface and continue removing the liner gradually.
-
The full adhesive strength is achieved in 48 hours after installation.
-
Try to avoid heavy use of tape during this time.
-
Considering various surfaces & application, the actual user shall perform his own tests to ensure that the product is suitable for his application and that it meets its demands.